• Background migrations
  • Pending migrations
  • Failed migrations
• Batched background migrations
  • Check the status of batched background migrations
  • Pause batched background migrations in GitLab 14.x
  • Automatic batch size optimization
  • Enable or disable automatic batch size optimization
• Troubleshooting
  • Enable or disable background migrations
  • Database migrations failing because of batched background migration not finished
    • Roll back and follow the required upgrade path
    • Roll forward and finish the migrations on the upgraded version
      • For a deployment with downtime
      • For a no-downtime deployment
  • Manually finishing a batched background migration
  • The BackfillNamespaceIdForNamespaceRoute batched migration job fails
  • Background migrations remain in the Sidekiq queue
  • Background migrations stuck in ‘pending’ state

Check for background migrations before upgrading

Certain releases may require different migrations to be finished before you update to the newer version.

There are two kinds of migrations:

• Background migrations
• Batched background migrations (available in GitLab 14.0 and later)

Background migrations and batched migrations are not the same, so you should check that both are complete before updating.

Decrease the time required to complete these migrations by increasing the number of Sidekiq workers that can process jobs in the background_migration queue.

Background migrations

Pending migrations

For Omnibus installations:

sudo gitlab-rails runner -e production 'puts Gitlab::BackgroundMigration.remaining'
sudo gitlab-rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.queued.count'

For installations from source:

cd /home/git/gitlab
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::BackgroundMigration.remaining'
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.queued.count'

Failed migrations

For Omnibus installations:

For GitLab 14.0-14.9:

sudo gitlab-rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.failed.count'

For GitLab 14.10 and later:

sudo gitlab-rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.with_status(:failed).count'

For installations from source:

For GitLab 14.0-14.9:

cd /home/git/gitlab
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.failed.count'

For GitLab 14.10 and later:

cd /home/git/gitlab
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::Database::BackgroundMigration::BatchedMigration.with_status(:failed).count'

Batched background migrations

There can be risks when disabling released features. Refer to this feature’s version history for more details.

To update database tables in batches, GitLab can use batched background migrations. These migrations are created by GitLab developers and run automatically on upgrade. However, such migrations are limited in scope to help with migrating some integer database columns to bigint. This is needed to prevent integer overflow for some tables.

Some installations may need to run GitLab 14.0 for at least a day to complete the database changes introduced by that upgrade.

Batched background migrations are handled by Sidekiq and run in isolation, so an instance can remain operational while the migrations are processed. However, there may be performance degradation on larger instances that are heavily used while batched background migrations are run, so it’s a good idea to actively monitor the Sidekiq status until all migrations are completed.

Check the status of batched background migrations

To check the status of batched background migrations:

1. On the top bar, select Main menu > Admin.

2. On the left sidebar, select Monitoring > Background Migrations.

   

All migrations must have a Finished status before you upgrade GitLab.

The status of batched background migrations can also be queried directly in the database.

1. Log into a psql prompt according to the directions for your instance’s installation method (for example, sudo gitlab-psql for Omnibus installations).

2. Run the following query in the psql session to see details on incomplete batched background migrations:

   select job_class_name, table_name, column_name, job_arguments from batched_background_migrations where status <> 3;
   

If the migrations are not finished and you try to update to a later version, GitLab prompts you with an error:

Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active':

If you get this error, check the batched background migration options to complete the upgrade.

Pause batched background migrations in GitLab 14.x

To pause an ongoing batched background migration, use the disable command above. This command causes the migration to complete the current batch, and then wait to start the next batch.

Use the following database queries to see the state of the current batched background migration:

1. Obtain the ID of the running migration:

   SELECT
    id,
    job_class_name,
    table_name,
    column_name,
    job_arguments
   FROM batched_background_migrations
   WHERE status <> 3;
   

2. Run this query, replacing XX with the ID you obtained in the previous step, to see the status of the migration:

   SELECT
    started_at,
    finished_at,
    finished_at - started_at AS duration,
    min_value,
    max_value,
    batch_size,
    sub_batch_size
   FROM batched_background_migration_jobs
   WHERE batched_background_migration_id = XX
   ORDER BY id DESC
   limit 10;
   

3. Run the query multiple times within a few minutes to ensure no new row has been added. If no new row has been added, the migration has been paused.

4. After confirming the migration has paused, restart the migration (using the enable command above) to proceed with the batch when ready. On larger instances, background migrations can take as long as 48 hours to complete each batch.

Automatic batch size optimization

There can be risks when disabling released features. Refer to this feature’s version history for more details.

To maximize throughput of batched background migrations (in terms of the number of tuples updated per time unit), batch sizes are automatically adjusted based on how long the previous batches took to complete.

Enable or disable automatic batch size optimization

Automatic batch size optimization for batched background migrations is under development but ready for production use. It is deployed behind a feature flag that is enabled by default. GitLab administrators with access to the GitLab Rails console can opt to disable it.

To enable it:

Feature.enable(:optimize_batched_migrations)

To disable it:

Feature.disable(:optimize_batched_migrations)

Troubleshooting

Enable or disable background migrations

In extremely limited circumstances, a GitLab administrator can disable either or both of these feature flags:

• execute_background_migrations
• execute_batched_migrations_on_schedule

These flags are enabled by default. Disable them only as a last resort to limit database operations in special circumstances, like database host maintenance.

Database migrations failing because of batched background migration not finished

When updating to GitLab 14.2 or later there might be a database migration failing with a message like:

StandardError: An error has occurred, all later migrations canceled:

Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active':
  {:job_class_name=>"CopyColumnUsingBackgroundMigrationJob", :table_name=>"push_event_payloads", :column_name=>"event_id", :job_arguments=>[["event_id"], ["event_id_convert_to_bigint"]]}

First, check if you have followed the version-specific upgrade instructions for 14.2. If you have, you can manually finish the batched background migration. If you haven’t, choose one of the following methods:

1. Rollback and upgrade through one of the required versions before updating to 14.2+.
2. Roll forward, staying on the current version and manually ensuring that the batched migrations complete successfully.

Roll back and follow the required upgrade path

1. Rollback and restore the previously installed version
2. Update to either 14.0.5 or 14.1 before updating to 14.2+
3. Check the status of the batched background migrations and make sure they are all marked as finished before attempting to upgrade again. If any remain marked as active, you can manually finish them.

Roll forward and finish the migrations on the upgraded version

For a deployment with downtime

To run all the batched background migrations, it can take a significant amount of time depending on the size of your GitLab installation.

1. Check the status of the batched background migrations in the database, and manually run them with the appropriate arguments until the status query returns no rows.
2. When the status of all of all them is marked as complete, re-run migrations for your installation.

3. Complete the database migrations from your GitLab upgrade:

   sudo gitlab-rake db:migrate
   

4. Run a reconfigure:

   sudo gitlab-ctl reconfigure
   

5. Finish the upgrade for your installation.

For a no-downtime deployment

As the failing migrations are post-deployment migrations, you can remain on a running instance of the upgraded version and wait for the batched background migrations to finish.

1. Check the status of the batched background migration from the error message, and make sure it is listed as finished. If it is still active, either wait until it is done, or manually finish it.
2. Re-run migrations for your installation, so the remaining post-deployment migrations finish.

Manually finishing a batched background migration

If you need to manually finish a batched background migration due to an error, you can run:

sudo gitlab-rake gitlab:background_migrations:finalize[<job_class_name>,<table_name>,<column_name>,'<job_arguments>']

Replace the values in angle brackets with the correct arguments. For example, if you receive an error similar to this:

StandardError: An error has occurred, all later migrations canceled:

Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active':
  {:job_class_name=>"CopyColumnUsingBackgroundMigrationJob", :table_name=>"push_event_payloads", :column_name=>"event_id", :job_arguments=>[["event_id"], ["event_id_convert_to_bigint"]]}

Plug the arguments from the error message into the command:

sudo gitlab-rake gitlab:background_migrations:finalize[CopyColumnUsingBackgroundMigrationJob,push_event_payloads,event_id,'[["event_id"]\, ["event_id_convert_to_bigint"]]']

If you need to manually run a batched background migration to continue an upgrade, you can check the status in the database and get the arguments from the query results. For example, if the query returns this:

            job_class_name             | table_name | column_name |           job_arguments
---------------------------------------+------------+-------------+------------------------------------
 CopyColumnUsingBackgroundMigrationJob | events     | id          | [["id"], ["id_convert_to_bigint"]]

The results from the query can be plugged into the command:

sudo gitlab-rake gitlab:background_migrations:finalize[CopyColumnUsingBackgroundMigrationJob,events,id,'[["id"]\, ["id_convert_to_bigint"]]']

The BackfillNamespaceIdForNamespaceRoute batched migration job fails

In GitLab 14.8, the BackfillNamespaceIdForNamespaceRoute batched background migration job may fail to complete. When retried, a 500 Server Error is returned. This issue was resolved in GitLab 14.9.

To resolve this issue, upgrade GitLab from 14.8 to 14.9. You can ignore the failed batch migration until after you update to GitLab 14.9.

Background migrations remain in the Sidekiq queue

Run the following check. If it returns non-zero and the count does not decrease over time, follow the rest of the steps in this section.

# For Omnibus installations:
sudo gitlab-rails runner -e production 'puts Gitlab::BackgroundMigration.remaining'

# For installations from source:
cd /home/git/gitlab
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::BackgroundMigration.remaining'

It is safe to re-execute the following commands, especially if you have 1000+ pending jobs which would likely overflow your runtime memory.

For Omnibus installations

# Start the rails console
sudo gitlab-rails c

# Execute the following in the rails console
scheduled_queue = Sidekiq::ScheduledSet.new
pending_job_classes = scheduled_queue.select { |job| job["class"] == "BackgroundMigrationWorker" }.map { |job| job["args"].first }.uniq
pending_job_classes.each { |job_class| Gitlab::BackgroundMigration.steal(job_class) }

For installations from source

# Start the rails console
sudo -u git -H bundle exec rails RAILS_ENV=production

# Execute the following in the rails console
scheduled_queue = Sidekiq::ScheduledSet.new
pending_job_classes = scheduled_queue.select { |job| job["class"] == "BackgroundMigrationWorker" }.map { |job| job["args"].first }.uniq
pending_job_classes.each { |job_class| Gitlab::BackgroundMigration.steal(job_class) }

Background migrations stuck in ‘pending’ state

• GitLab 13.6 introduced an issue where a background migration named BackfillJiraTrackerDeploymentType2 can be permanently stuck in a pending state across upgrades. To clean up this stuck migration, see the 13.6.0 version-specific instructions.
• GitLab 14.2 introduced an issue where a background migration named BackfillDraftStatusOnMergeRequests can be permanently stuck in a pending state across upgrades when the instance lacks records that match the migration’s target. To clean up this stuck migration, see the 14.2.0 version-specific instructions.
• GitLab 14.4 introduced an issue where a background migration named PopulateTopicsTotalProjectsCountCache can be permanently stuck in a pending state across upgrades when the instance lacks records that match the migration’s target. To clean up this stuck migration, see the 14.4.0 version-specific instructions.
• GitLab 14.5 introduced an issue where a background migration named UpdateVulnerabilityOccurrencesLocation can be permanently stuck in a pending state across upgrades when the instance lacks records that match the migration’s target. To clean up this stuck migration, see the 14.5.0 version-specific instructions.
• GitLab 14.8 introduced an issue where a background migration named PopulateTopicsNonPrivateProjectsCount can be permanently stuck in a pending state across upgrades. To clean up this stuck migration, see the 14.8.0 version-specific instructions.
• GitLab 14.9 introduced an issue where a background migration named ResetDuplicateCiRunnersTokenValuesOnProjects can be permanently stuck in a pending state across upgrades when the instance lacks records that match the migration’s target. To clean up this stuck migration, see the 14.9.0 version-specific instructions.

For other background migrations stuck in pending, run the following check. If it returns non-zero and the count does not decrease over time, follow the rest of the steps in this section.

# For Omnibus installations:
sudo gitlab-rails runner -e production 'puts Gitlab::Database::BackgroundMigrationJob.pending.count'

# For installations from source:
cd /home/git/gitlab
sudo -u git -H bundle exec rails runner -e production 'puts Gitlab::Database::BackgroundMigrationJob.pending.count'

It is safe to re-attempt these migrations to clear them out from a pending status:

For Omnibus installations

# Start the rails console
sudo gitlab-rails c

# Execute the following in the rails console
Gitlab::Database::BackgroundMigrationJob.pending.find_each do |job|
  puts "Running pending job '#{job.class_name}' with arguments #{job.arguments}"
  result = Gitlab::BackgroundMigration.perform(job.class_name, job.arguments)
  puts "Result: #{result}"
end

For installations from source

# Start the rails console
sudo -u git -H bundle exec rails RAILS_ENV=production

# Execute the following in the rails console
Gitlab::Database::BackgroundMigrationJob.pending.find_each do |job|
  puts "Running pending job '#{job.class_name}' with arguments #{job.arguments}"
  result = Gitlab::BackgroundMigration.perform(job.class_name, job.arguments)
  puts "Result: #{result}"
end